Dentures & Lab

486 products

  • Superflex Discs Single Sided RA (Upper) 22mm

    UnoDent Superflex Discs Single Sided RA (Upper) 22mm

    Diamond discs with fine diamond grit. For separating ceramics, plaster, acrylics and resin veneers. Fixed mandrel.BHU160 (Each) UnoDent code: BHU160

    £10.22

  • Superflex Discs Single Sided RA (Lower) 22mm

    UnoDent Superflex Discs Single Sided RA (Lower) 22mm

    Diamond discs with fine diamond grit. For separating ceramics, plaster, acrylics and resin veneers. Fixed mandrel.BHU175 (Each) UnoDent code: BHU175

    £10.22

  • Tooth Carding Wax Red - Hard

    Kemdent Tooth Carding Wax Red - Hard

    Tooth Carding Wax is used by the dentists and technicians for general dental purposes and especially to mount teeth. Colour: Red - hard, pliable.. Sheet Size: 250mm x 64mm x 2.5mmJWC110 (500g) Kemdent code: DWS304

    £12.85

  • Articulation Paper Combi – Red/Blue

    UnoDent Articulation Paper Combi – Red/Blue

    Articulation Paper 0.0028 in / 71 MicronsITU003 (12 x 12 sheets) UnoDent code: ITU003

  • Articulating Paper Thick Blue, 127 microns, 12 x 12 Sheets

    Perfection Plus Articulating Paper Thick Blue, 127 microns, 12 x 12 Sheets

    A super sensitive articulating paper for marking every point of articulation. The paper is smooth, soft and non-sticking providing accurate articulations.ITP605 (Pack 12) Perfection Plus code: 002/0007

  • IPS Ivocolor Essence Teracotta E09

    Ivoclar Vivadent IPS Ivocolor Essence Teracotta E09

    IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality. IPS Ivocolor Essence consists of 23 shade powders that are used for adjusting the brightness of layering materials, for shade characterizations in the layering technique and for surface characterizations when using IPS ceramic materials. The powders exhibit varying levels of fluorescence, depending on their shade.JCI585 (1.8g) Ivoclar Vivadent code: 667660

    £16.99

  • IPS Ivocolor Essence Espresso E12

    Ivoclar Vivadent IPS Ivocolor Essence Espresso E12

    IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality. IPS Ivocolor Essence consists of 23 shade powders that are used for adjusting the brightness of layering materials, for shade characterizations in the layering technique and for surface characterizations when using IPS ceramic materials. The powders exhibit varying levels of fluorescence, depending on their shade.JCI584 (1.8g) Ivoclar Vivadent code: 667663

    £16.99

  • Wisdom Denture Brush

    Wisdom Wisdom Denture Brush

    Effective Denture Cleaning Specially shaped to match the shape of dentures for effective cleaning. With stiff tapered filaments to penetrate and clean between teeth.PAW069 (Pack 6) Wisdom code: 1178XSI

  • Alminax Bite Wax 10 Sheets

    Kemdent Alminax Bite Wax 10 Sheets

    Alminax Bite Wax sheets are a proven bite registration material, formulated to provide dentists with a dense yet easily softened bite wax that is stable at room temperature. To deliver a reliable and dimensionally stable wax bite registration you need a material designed for purpose. Simply warming up a piece of modelling wax, bending it into a U shape and asking a patient to bite down is not cost effective in the long term. The thickness and consistency of Alminax has been specially chosen to provide the most accurate bite registration. Sheets Size: 142mm x 73mm x 2.7mm thick. 10 sheets per 250g box. 20 sheets per 500g box. Colour: Silver Grey Softens at 55°CJWB010 (250g) Kemdent code: DWS219

  • Articulating Paper Progress - Pre Cut Strips Red 100µ

    Bausch Articulating Paper Progress - Pre Cut Strips Red 100µ

    Micron-thin articulating paper. This smooth fibre reinforced paper with high colouring capacity adapts perfectly to the occlusal surfaces. The occlusal contact points or centric contacts are marked very precisely because of its progressive colour transfer. The 100 micron-thin paper is impregnated with hydrophile waxes and pharmaceutical oils. This unique combination with the bonding agent Transculase enhances detection of high spots on hard to locate surfaces, such as highly polished metals or ceramics. 52mm x 18mmITN053 (Pack 100) Bausch code: BK 58

  • Tenatex Red Sheet Wax

    Kemdent Tenatex Red Sheet Wax

    Tenatex Red Modelling (base plate) wax sheets are used by the technician to create the preliminary denture base for the dentist to try in the patients mouth. Colour: Deep Red Sheet size: 187mm x 88mm x 1.5mm thick Pack size: 500g (24 sheets)JWB030 (500g) Kemdent code: WAX616

  • Anutex Modelling Sheet Wax

    Kemdent Anutex Modelling Sheet Wax

    Anutex modelling wax sheets are used by the technician to create the preliminary denture base for the dentist to try in the patients mouth. Colour: Translucent Pink Sheet size: 187mm x 88mm x 1.5mm thick Pack size: 500g (24 sheets) 2.5kg (120 sheets approx) Will not irritate oral tissues. No unpleasant odour or flavour. Softens without becoming flaky or crumbly. Does not adhere fingers. Trims easily and cleanly. Shows a smooth glossy surface after gentle flaming. Does not distort unduly in the mouth.JWB042 (500g) Kemdent code: WAX617

  • Wax Carver Hylin

    ASA Dental Wax Carver Hylin

    Hylin wax and modelling carversDCC230 (Each) ASA Dental code: 5100

  • Articulating Paper Combi Red/Blue 71 microns

    Perfection Plus Articulating Paper Combi Red/Blue 71 microns

    Articulation Paper Combi Red/Blue 71 microns A super sensitive articulating paper for marking every point of articulation. The paper is smooth, soft and non-sticking providing accurate articulations. 12 sheets per book. 12 books per pack.ITP601 (12 x 12 Sheets) Perfection Plus code: 002/0005

  • Acrylic Trimmers HP Grey R4B RB4 Medium

    Easypol Acrylic Trimmers HP Grey R4B RB4 Medium

    Silicone Polishers for Prosthetic and Orthodontic Acrylics, as replacement for sandpaper in inaccessible areas.BAS704 (Each) Easypol code: 0666HP-6

    £10.46

  • Plaster Knife

    ASA Dental Plaster Knife

    Wax knives instrument made of stainless steel and wood (handle)JWX050 (Each) ASA Dental code: 5300-2

  • Acrylic Trimmers HP Green R10C R10 Coarse

    Easypol Acrylic Trimmers HP Green R10C R10 Coarse

    Silicone Polishers for Prosthetic and Orthodontic Acrylics, as replacement for sandpaper in inaccessible areas.BAS707 (Each) Easypol code: 0674HP-6

    £10.25

  • Sticky Wax Model Cement Original 70g

    Kemdent Sticky Wax Model Cement Original 70g

    Sticky Wax also known as model cement. Melt the end of the stick with a gas flame and use as wax glue. For removal just reheat and the wax melts cleanly away without residue. Colour: Natural. Consistency: Brittle Approx 12 sticks per box.JWS011 (70g) Kemdent code: DWS401

  • SLX Plaster Knife Gritman

    Unirose SLX Plaster Knife Gritman

    SLX Plaster Knife GritmanJPS630 (Each) Unirose code: DL.330.020

  • Sintered Diamond Disc Crown Separator RA 5114 080

    Edenta Sintered Diamond Disc Crown Separator RA 5114 080

    Sintered Diamond Disc.BTE011 (Each) Edenta code: 5114RA

    £15.38

  • Acrylic Trimmers HP Green R4C R4 Coarse

    Easypol Acrylic Trimmers HP Green R4C R4 Coarse

    Silicone Polishers for Prosthetic and Orthodontic Acrylics, as replacement for sandpaper in inaccessible areas.BAS705 (Each) Easypol code: 0676HP-6

  • Denture Container Yellow

    Larident Denture Container Yellow

    Prothesis box with internal filter, autoclavable, packed individually in a plastic bagYOM396 (Each) Larident code: G1.GIALLO

  • Cerabien Milai Internal Stain Kit 45g

    Kuraray Cerabien Milai Internal Stain Kit 45g

    Cerabien™ MiLai is a set of porcelains and internal stains specifically designed for the micro-layering technique. The name “MiLai” is derived from the term “micro-layering” and the Japanese word “mirai” (which means future). The innovative product based on synthetic feldspar enables dental technicians to add the final touch to their zirconia or lithium disilicate restorations in a simple and time-saving procedure – for outstanding aesthetics right from the start. Unique Porcelain Properties Cerabien™ MiLai, like all other porcelains from Kuraray Noritake Dental Inc., is based on synthetic feldspathic porcelain technology developed by Noritake Dental Supply Co., Limited in the late 1980s. Its material structure and particle distribution resemble those of natural teeth. Multiple firing is possible without affecting the material’s properties. Because of this quality, dental professionals can rely on persistent handling properties and predictable results every time. Fluorescence Cerabien™ MiLai porcelain is fluorescent, mimicking the optical properties of a natural tooth. This adds to the vitality and life-like appearance of a restoration. Only Tissue shades do not have the same fluorescent properties, as natural gingiva is not fluorescent. Features & Benefits :- For lithium disilicate and zirconia. Simplified, time-saving, and cost-effective finishing workflow to achieve excellence. Low firing temperature (740°C) For compatibility with a broad range of restorative materials including zirconia and lithium disilicate* and a simplified inventory management. Unique procelain properties. Based on synthetic feldspathic porcelain for consistent handling and excellent mechanical properties; multiple firing is possible. The line-up of Cerabien MiLai has been designed to fulfill the needs of dental technicians preferring this simplified, efficient and economic finishing approach. It consists of 16 porcelains and 15 internal stains easy to select and manage. For additional shade effects, a mixing of the porcelains is possible*. *Mixing with other Cerabien MiLai porcelain shades is possible. Do not mix with any porcelains from other porcelain series or porcelains from other manufacturers. Internal Stain Kit Contains: 15 shades for your convenience. Besides the shades, the kit also contains IS Liquid (10ml) and IS colour guide.JDS701 (Kit 45g) Kuraray code: 109-0020EU

    £427.20

  • Cerabien Milai Micro Layering Kit 160g

    Kuraray Cerabien Milai Micro Layering Kit 160g

    Cerabien™ MiLai is a set of porcelains and internal stains specifically designed for the micro-layering technique. The name “MiLai” is derived from the term “micro-layering” and the Japanese word “mirai” (which means future). The innovative product based on synthetic feldspar enables dental technicians to add the final touch to their zirconia or lithium disilicate restorations in a simple and time-saving procedure – for outstanding aesthetics right from the start. Unique Porcelain Properties Cerabien™ MiLai, like all other porcelains from Kuraray Noritake Dental Inc., is based on synthetic feldspathic porcelain technology developed by Noritake Dental Supply Co., Limited in the late 1980s. Its material structure and particle distribution resemble those of natural teeth. Multiple firing is possible without affecting the material’s properties. Because of this quality, dental professionals can rely on persistent handling properties and predictable results every time. Fluorescence Cerabien™ MiLai porcelain is fluorescent, mimicking the optical properties of a natural tooth. This adds to the vitality and life-like appearance of a restoration. Only Tissue shades do not have the same fluorescent properties, as natural gingiva is not fluorescent. Features & Benefits :- For lithium disilicate and zirconia. Simplified, time-saving, and cost-effective finishing workflow to achieve excellence. Low firing temperature (740°C) For compatibility with a broad range of restorative materials including zirconia and lithium disilicate* and a simplified inventory management. Unique procelain properties. Based on synthetic feldspathic porcelain for consistent handling and excellent mechanical properties; multiple firing is possible. The line-up of Cerabien MiLai has been designed to fulfill the needs of dental technicians preferring this simplified, efficient and economic finishing approach. It consists of 16 porcelains and 15 internal stains easy to select and manage. For additional shade effects, a mixing of the porcelains is possible*. *Mixing with other Cerabien MiLai porcelain shades is possible. Do not mix with any porcelains from other porcelain series or porcelains from other manufacturers. Contains 16 ceramic masses of 10 g each: CERABIEN MiLai TX (10G) [SKU: 109-0051EU] CERABIEN MiLai ELT1 (10G) [SKU: 109-0061EU] CERABIEN MiLai LTX (10G) [SKU: 109-0071EU] CERABIEN MiLai LT1 (10G) [SKU: 109-0081EU] CERABIEN MiLai LT Super Gray (10G) [SKU: 109-0091EU] CERABIEN MiLai LT Royal Blue (10G) [SKU: 109-0101EU] CERABIEN MiLai Aqua Blue 2 (10G) [SKU: 109-0111EU] CERABIEN MiLai Creamy Enamel (10G) [SKU: 109-0121EU] CERABIEN MiLai E2 (10G) [Order No.: 109-0131EU] CERABIEN MiLai CCV-2 (10G) [SKU: 109-0141EU] CERABIEN MiLai Tissue 1 (10G) [SKU: 109-0151EU] CERABIEN MiLai Tissue 4 (10G) [SKU: 109-0161EU] CERABIEN MiLai Tissue 5 (10G) [SKU: 109-0171EU] CERABIEN MiLai Tissue 6 (10G) [SKU: 109-0181EU] CERABIEN MiLai Value Liner 1 (10G) [SKU: 109-0191EU] CERABIEN MiLai Value Liner 2 (10G) [SKU: 109-0201EU]JDS700 (Kit 160g) Kuraray code: 109-0010EU

    £328.61


You have seen 408 out of 486 products

Login

Forgot your password?

Don't have an account yet?
Create account