Dentures & Lab
-
Meisinger Cutter Steel Bur HP 75 060
For effective trimming of materials for obtaining even surfaces.BAT220 (Pack 5) Meisinger code: M75104060
£31.70
-
Bausch Articulating Paper Blue/Blue BK 01 – Thick 200µ
Bausch 200µ Articulating Paper with progressive color transfer, that highlights overall pressure distribution by means of different color shades: The lighter the bite, the lighter the mark. The harder the bite, the darker the mark. Accurate pressure distribution can easily be obtained within seconds. High spots are immediately visible. Bausch 200µ Articulating Paper with progressive color transfer can highlight any existing masticatory pressure interference clearly. Thinner test products which are available in thicknesses of up to 8µ (Arti-Fol®) should be used after adjusting and localising the problem area. 52mm x 18mmITN010 (Box 300) Bausch code: BK 01
£21.35
-
Bausch Articulating Paper Red/Red BK 02 – Thick 200µ
Bausch 200µ Articulating Paper with progressive color transfer, that highlights overall pressure distribution by means of different color shades: The lighter the bite, the lighter the mark. The harder the bite, the darker the mark. Accurate pressure distribution can easily be obtained within seconds. High spots are immediately visible. Bausch 200µ Articulating Paper with progressive color transfer can highlight any existing masticatory pressure interference clearly. Thinner test products which are available in thicknesses of up to 8µ (Arti-Fol®) should be used after adjusting and localising the problem area. 52mm x 18mmITN012 (Box 300) Bausch code: BK 02
£21.35
-
Ivoclar Vivadent IPS d.SIGN Effect 4
IPS d.SIGN Natural Beauty provides pure esthetics. The fluorapatite leucite glass-ceramic features true-to-nature properties ranging from the light optical features to the enamel-like abrasion behaviour. With the well-balanced and excellently thought-out concept of IPS d.SIGN, the individual design possibilities are virtually boundless. IPS d.SIGN impulse powders are ready-mixed ceramic materials ranging from Mamelon to Opal that create true-to-nature effects.JCI038 (20g) Ivoclar Vivadent code: 556597
£34.70
-
Ivoclar Vivadent IPS d.SIGN Effect 2
IPS d.SIGN Natural Beauty provides pure esthetics. The fluorapatite leucite glass-ceramic features true-to-nature properties ranging from the light optical features to the enamel-like abrasion behaviour. With the well-balanced and excellently thought-out concept of IPS d.SIGN, the individual design possibilities are virtually boundless. IPS d.SIGN impulse powders are ready-mixed ceramic materials ranging from Mamelon to Opal that create true-to-nature effects.JCI037 (20g) Ivoclar Vivadent code: 556595
£34.70
-
Ivoclar Vivadent IPS d.SIGN Effect 1
IPS d.SIGN Natural Beauty provides pure esthetics. The fluorapatite leucite glass-ceramic features true-to-nature properties ranging from the light optical features to the enamel-like abrasion behaviour. With the well-balanced and excellently thought-out concept of IPS d.SIGN, the individual design possibilities are virtually boundless. IPS d.SIGN impulse powders are ready-mixed ceramic materials ranging from Mamelon to Opal that create true-to-nature effects.JCI035 (20g) Ivoclar Vivadent code: 556594
£34.70
-
Ivoclar Vivadent IPS d.SIGN Gingiva 2
IPS d.SIGN Natural Beauty provides pure esthetics. The fluorapatite leucite glass-ceramic features true-to-nature properties ranging from the light optical features to the enamel-like abrasion behaviour. With the well-balanced and excellently thought-out concept of IPS d.SIGN, the individual design possibilities are virtually boundless.JCI045 (20g) Ivoclar Vivadent code: 556616
£34.70
-
IPS d.SIGN Special Incisal Grey
IPS d.SIGN Natural Beauty provides pure esthetics. The fluorapatite leucite glass-ceramic features true-to-nature properties ranging from the light optical features to the enamel-like abrasion behaviour. With the well-balanced and excellently thought-out concept of IPS d.SIGN, the individual design possibilities are virtually boundless.JCI092 (20g) Ivoclar Vivadent code: 556582
£34.70
-
IPS d.SIGN Occlusal Dentin 20g
IPS d.SIGN Natural Beauty provides pure esthetics. The fluorapatite leucite glass-ceramic features true-to-nature properties ranging from the light optical features to the enamel-like abrasion behaviour. With the well-balanced and excellently thought-out concept of IPS d.SIGN, the individual design possibilities are virtually boundless.JCI066 (20g) Ivoclar Vivadent code: 556588
£34.70
-
Ivoclar Vivadent IPS d.SIGN Transpa Neutral
IPS d.SIGN Natural Beauty provides pure esthetics. The fluorapatite leucite glass-ceramic features true-to-nature properties ranging from the light optical features to the enamel-like abrasion behaviour. With the well-balanced and excellently thought-out concept of IPS d.SIGN, the individual design possibilities are virtually boundless.JCI102 (20g) Ivoclar Vivadent code: 556586
£34.70
-
Ivoclar Vivadent IPS d.SIGN Deepdentin A-D A1
IPS d.SIGN Natural Beauty provides pure esthetics. The fluorapatite leucite glass-ceramic features true-to-nature properties ranging from the light optical features to the enamel-like abrasion behaviour. With the well-balanced and excellently thought-out concept of IPS d.SIGN, the individual design possibilities are virtually boundless.JCI010 (20g) Ivoclar Vivadent code: 560512
£34.70
-
IPS d.SIGN Occlusal Dentin Orange 20g
IPS d.SIGN Natural Beauty provides pure esthetics. The fluorapatite leucite glass-ceramic features true-to-nature properties ranging from the light optical features to the enamel-like abrasion behaviour. With the well-balanced and excellently thought-out concept of IPS d.SIGN, the individual design possibilities are virtually boundless.JCI065 (20g) Ivoclar Vivadent code: 556587
£34.70
-
UnoDent Acrylic Trimmers - Tungsten Carbide Plain Cut Coarse HP 351 060
Application:- Trimming of hard materials - titanium, acrylics, plaster, ceramics, precious metals and non-precious alloys, prothesis and surgical acrylics, soft relinings and tray materials. Quality:- Working part, high-class sintered tungsten carbide Material of the shank, high-alloyed steel or carbide Strong construction Precision toothing Optimum accuracy to size and concentricity - superior to ISO standards All cutters developed and manufactured for their specific application. Cross Cut Standard - For coarse abrasion on chrome-cobalt alloys, precious metal alloys, chrome-nickel alloys, model cast alloys, and acrylics Cross Cut Fine - Suitable for all dental materials. It smoothens the surface and it enables accurate operation on any structure. Cross Cut Coarse - For efficient reduction of resins inc tray materials as well as plaster Plain Cut Standard - For all dental materials - the plain cut enables a smooth cutting pattern, particularly on resins, and thus reduces work Plain Cut Coarse - Rapid and effective trimming of acrylic and plaster.BAT150 (Each) UnoDent code: BAT150
£20.25
-
UnoDent Acrylic Trimmers - Tungsten Carbide Cross Cut Fine HP 251 60
Application:- Trimming of hard materials - titanium, acrylics, plaster, ceramics, precious metals and non-precious alloys, prothesis and surgical acrylics, soft relinings and tray materials. Quality:- Working part, high-class sintered tungsten carbide Material of the shank, high-alloyed steel or carbide Strong construction Precision toothing Optimum accuracy to size and concentricity - superior to ISO standards All cutters developed and manufactured for their specific application. Cross Cut Standard - For coarse abrasion on chrome-cobalt alloys, precious metal alloys, chrome-nickel alloys, model cast alloys, and acrylics Cross Cut Fine - Suitable for all dental materials. It smoothens the surface and it enables accurate operation on any structure. Cross Cut Coarse - For efficient reduction of resins inc tray materials as well as plaster Plain Cut Standard - For all dental materials - the plain cut enables a smooth cutting pattern, particularly on resins, and thus reduces work Plain Cut Coarse - Rapid and effective trimming of acrylic and plaster.BAT070 (Each) UnoDent code: BAT070
£21.49
-
Ivoclar Vivadent IPS e.max Ceram Opal Effect 1
IPS e.max Ceram is suitable for efficient standard layering as well as for demanding high-end layering with lifelike play of light. The classic Dentin and Incisal materials are ideally coordinated with more opaque all-ceramic framework structures and thus are ideally suitable for the veneering of more opaque substructures. Brightness and chroma are balanced. Therefore, an optimum shade match with the A-D shade guide is achieved. The Opal Effect materials are available in six shade gradations. Starting with Opal Effect 1 – with naturally enhanced opalescence and simultaneous high translucency – the brightness value between Opal Effect 2 and Opal Effect 4 is continuously increased. Opal Effect 5 then demonstrates the typical opal shade. The Opal Effect violet material is used to reduce the brightness value in the incisal area.JCI290 (20g) Ivoclar Vivadent code: 596990
£50.94
-
UnoDent Acrylic Trimmers - Tungsten Carbide Cross Cut Standard HP 351 60
Application:- Trimming of hard materials - titanium, acrylics, plaster, ceramics, precious metals and non-precious alloys, prothesis and surgical acrylics, soft relinings and tray materials. Quality:- Working part, high-class sintered tungsten carbide Material of the shank, high-alloyed steel or carbide Strong construction Precision toothing Optimum accuracy to size and concentricity - superior to ISO standards All cutters developed and manufactured for their specific application. Cross Cut Standard - For coarse abrasion on chrome-cobalt alloys, precious metal alloys, chrome-nickel alloys, model cast alloys, and acrylics Cross Cut Fine - Suitable for all dental materials. It smoothens the surface and it enables accurate operation on any structure. Cross Cut Coarse - For efficient reduction of resins inc tray materials as well as plaster Plain Cut Standard - For all dental materials - the plain cut enables a smooth cutting pattern, particularly on resins, and thus reduces work Plain Cut Coarse - Rapid and effective trimming of acrylic and plaster.BAT005 (Each) UnoDent code: BAT005
£18.81
-
UnoDent Acrylic Trimmers - Tungsten Carbide Cross Cut Standard HP 77 60
Application:- Trimming of hard materials - titanium, acrylics, plaster, ceramics, precious metals and non-precious alloys, prothesis and surgical acrylics, soft relinings and tray materials. Quality:- Working part, high-class sintered tungsten carbide Material of the shank, high-alloyed steel or carbide Strong construction Precision toothing Optimum accuracy to size and concentricity - superior to ISO standards All cutters developed and manufactured for their specific application. Cross Cut Standard - For coarse abrasion on chrome-cobalt alloys, precious metal alloys, chrome-nickel alloys, model cast alloys, and acrylics Cross Cut Fine - Suitable for all dental materials. It smoothens the surface and it enables accurate operation on any structure. Cross Cut Coarse - For efficient reduction of resins inc tray materials as well as plaster Plain Cut Standard - For all dental materials - the plain cut enables a smooth cutting pattern, particularly on resins, and thus reduces work Plain Cut Coarse - Rapid and effective trimming of acrylic and plaster.BAT045 (Each) UnoDent code: BAT045
£18.81
-
Ivoclar Vivadent IPS e.max Alox Plunger
The IPS Alox plunger is used for the pressing of IPS e.max Press ingots.JCI200 (Pack 2) Ivoclar Vivadent code: 597062
£70.86
-
UnoDent Acrylic Trimmers - Tungsten Carbide Cross Cut Coarse HP 77 60
Application:- Trimming of hard materials - titanium, acrylics, plaster, ceramics, precious metals and non-precious alloys, prothesis and surgical acrylics, soft relinings and tray materials. Quality:- Working part, high-class sintered tungsten carbide Material of the shank, high-alloyed steel or carbide Strong construction Precision toothing Optimum accuracy to size and concentricity - superior to ISO standards All cutters developed and manufactured for their specific application. Cross Cut Standard - For coarse abrasion on chrome-cobalt alloys, precious metal alloys, chrome-nickel alloys, model cast alloys, and acrylics Cross Cut Fine - Suitable for all dental materials. It smoothens the surface and it enables accurate operation on any structure. Cross Cut Coarse - For efficient reduction of resins inc tray materials as well as plaster Plain Cut Standard - For all dental materials - the plain cut enables a smooth cutting pattern, particularly on resins, and thus reduces work Plain Cut Coarse - Rapid and effective trimming of acrylic and plaster.BAT090 (Each) UnoDent code: BAT090
£21.05
-
Ivoclar Vivadent IPS d.SIGN Opaquer Paste A-D C4
IPS d.SIGN Natural Beauty provides pure esthetics. The fluorapatite leucite glass-ceramic features true-to-nature properties ranging from the light optical features to the enamel-like abrasion behaviour. With the well-balanced and excellently thought-out concept of IPS d.SIGN, the individual design possibilities are virtually boundless.JCI087 (3g) Ivoclar Vivadent code: 558210
£32.95
-
Ivoclar Vivadent IPS d.SIGN Opaquer Paste A-D B4
IPS d.SIGN Natural Beauty provides pure esthetics. The fluorapatite leucite glass-ceramic features true-to-nature properties ranging from the light optical features to the enamel-like abrasion behaviour. With the well-balanced and excellently thought-out concept of IPS d.SIGN, the individual design possibilities are virtually boundless.JCI083 (3g) Ivoclar Vivadent code: 558206
£32.95
-
Ivoclar Vivadent IPS d.SIGN Opaquer Paste A-D A4
IPS d.SIGN Natural Beauty provides pure esthetics. The fluorapatite leucite glass-ceramic features true-to-nature properties ranging from the light optical features to the enamel-like abrasion behaviour. With the well-balanced and excellently thought-out concept of IPS d.SIGN, the individual design possibilities are virtually boundless.JCI079 (3g) Ivoclar Vivadent code: 558202
£32.95
-
GC ISO Functional Sticks
Thermoplastic sticks for functional and relining impressions, also useful as a space maintainer. Indications:- Impression material for rebasing and muscle trimming. Advantages:- Easy to warm up at 62°C Quick hardening in cold water Wide working areaIGG020 (Pack 15) GC code: 10000007
£34.26
-
Mizzy Pressure Indicating Paste (PIP)
The Mizzy Pressure Indicating Pastes are the standard in the dental industry for checking and fitting prosthetic devices. PIP is the leading product for this important procedure. It is a pure white silicone paste used for seating crowns, bridge work and full, intermediate, and partial dentures. Using PIP yields a specific result that is easily read and thoroughly reliable, surpassing results obtained with other pastes such as chemical set materials. Areas of physiologic tissue contact are easily distinguishable from the areas of premature contact. No pre-use preparation is necessary, although for superior results, the PIP Spray is a good wetting agent. Adheres wonderfully to dentures and partials only. No change in denture alignment when used. Free flowing, uniform consistency regardless of mouth or storage temperatures. Easy to clean up with Mizzy Orange Solvent or the PIP Remover.ITC011 (1oz) Mizzy code: 127725
£19.43
You have seen 216 out of 486 products