Dentures & Lab
-
GC Coe-Comfort Tissue Conditioner Intro Pack
Acrylic temporary relining material also suitable as functional impression material. Delayed final setting - reaches final hardness after 3-4 days. Contains: 170g Powder, 177ml Liquid, & Accessories.IFR410 (Each) GC code: 10001719
£113.66
-
Troll TrollFoil Red 8µ
Pre-mounted articulating paper 8 micron. TrollFoil can be used under a wide variety of clinical situations including wet or dry teeth, limited opening, limited vestibular space, gaggers, and metal and non-metalic restorations. The double-sided foil is only 8 microns thick, and it has no problem marking wet surfaces, dry surfaces or highly polished surfaces such as cast gold or porcelain. Mounted in its own frame, no forceps needed Inked on both sidesITP630 (Box 500) Troll code: 12000600
£90.77
-
Troll TrollFoil Blue 8µ
Pre-mounted articulating paper 8 micron. TrollFoil can be used under a wide variety of clinical situations including wet or dry teeth, limited opening, limited vestibular space, gaggers, and metal and non-metalic restorations. The double-sided foil is only 8 microns thick, and it has no problem marking wet surfaces, dry surfaces or highly polished surfaces such as cast gold or porcelain. Mounted in its own frame, no forceps needed Inked on both sidesITP625 (Box 500) Troll code: 12000501
£90.77
-
GC Fit Checker Advanced White 1:1 Pack
Fit Checker Advanced & Fit Checker Advanced Blue are Vinyl Polyether materials for checking pressure spots and the fit accuracy of prosthetic works. Thanks to their very thin consistency, sharp setting time and hydrophilicity, both materials are very convenient to use and offer an accurate identification of misfits of prosthetic works of all kinds. The choice of 2 transparent, well contrasting colours allows an easy evaluation of any type of prosthesis: blue, for aesthetic restorations such as ceramic based crowns & bridges and for occlusal checking; white, for metal based restorations and dentures. Indications:- Fit Checker Advanced Blue has the ideal blue colour gradation for fit checking of all kinds of prosthetic works, especially resin, ceramic and zirconia-based crowns and bridges as well as bite registration and evaluation of occlusal contacts. Fit Checker Advanced has the ideal white colour gradation for fit checking of all kinds of prosthetic works, especially complete and partial dentures and metal-based crowns and bridges Advantages:- Thixotropic consistency with easy flow under pressure Minimal film thickness for a precise seat of the restoration Visible colour gradation for easy identification of misfits Increased hardness to allow smooth and easy trimming with bur High tear resistance for easy removal Contains: 42ml Base, 42ml Catalyst, 3g Retarder & Mixing Pad.ITG070 (Each) GC code: 10001025
£69.67
-
Ivoclar Vivadent IPS e.max Press LT (Low Translucency) Ingots A2
The LT ingots are available in 16 A–D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these ingots suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents greying of the restorations. The esthetic appearance of the restorations is maximized by the cut-back technique.JCI397 (Pack 5) Ivoclar Vivadent code: 605274
£96.55
-
Ivoclar Vivadent IPS e.max Press HO (High Opacity) Ingots 1
IPS e.max Press HO (High Opacity) Ingots This ingot is available in three shades.JCI385 (Pack 5) Ivoclar Vivadent code: 626302
£96.55
-
Ivoclar Vivadent IPS e.max Press LT (Low Transparency) Ingots A1
The LT ingots are available in 16 A–D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these ingots suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents greying of the restorations. The esthetic appearance of the restorations is maximized by the cut-back technique.JCI395 (Pack 5) Ivoclar Vivadent code: 605273
£96.55
-
Ivoclar Vivadent IPS e.max Press MO (Medium Opacity) Ingots 0
The MO ingots are available in five group shades (MO 0, MO 1, MO 2, MO 3, MO 4). Given their opacity, these ingots are intended for the fabrication of substructures that are placed on vital or slightly discoloured prepared teeth. They form an excellent base for natural-looking restorations completed with the layering technique.JCI425 (Pack 5) Ivoclar Vivadent code: 596756
£96.55
-
Ivoclar Vivadent IPS e.max Press LT (Low Translucency) Ingots D4
The LT ingots are available in 16 A–D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these ingots suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents greying of the restorations. The esthetic appearance of the restorations is maximized by the cut-back technique.JCI419 (Pack 5) Ivoclar Vivadent code: 626312
£96.55
-
Ivoclar Vivadent IPS e.max Press LT (Low Translucency) Ingots BL3
The LT ingots are available in 16 A–D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these ingots suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents greying of the restorations. The esthetic appearance of the restorations is maximized by the cut-back technique.JCI409 (Pack 5) Ivoclar Vivadent code: 605295
£96.55
-
Ivoclar Vivadent IPS e.max Press LT (Low Translucency) Ingots BL2
The LT ingots are available in 16 A–D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these ingots suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents greying of the restorations. The esthetic appearance of the restorations is maximized by the cut-back technique.JCI408 (Pack 5) Ivoclar Vivadent code: 605294
£96.55
-
Ivoclar Vivadent IPS e.max Press LT (Low Translucency) Ingots BL1
The LT ingots are available in 16 A–D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these ingots suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents greying of the restorations. The esthetic appearance of the restorations is maximized by the cut-back technique.JCI407 (Pack 5) Ivoclar Vivadent code: 605293
£96.55
-
Ivoclar Vivadent IPS e.max Press LT (Low Translucency) Ingots B3
The LT ingots are available in 16 A–D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these ingots suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents greying of the restorations. The esthetic appearance of the restorations is maximized by the cut-back technique.JCI405 (Pack 5) Ivoclar Vivadent code: 605279
£96.55
-
Ivoclar Vivadent IPS e.max Press LT (Low Translucency) Ingots B1
The LT ingots are available in 16 A–D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these ingots suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents greying of the restorations. The esthetic appearance of the restorations is maximized by the cut-back technique.JCI403 (Pack 5) Ivoclar Vivadent code: 605277
£96.55
-
Ivoclar Vivadent IPS e.max Press LT (Low Translucency) Ingots A3
The LT ingots are available in 16 A–D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these ingots suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents greying of the restorations. The esthetic appearance of the restorations is maximized by the cut-back technique.JCI399 (Pack 5) Ivoclar Vivadent code: 605275
£96.55
-
GC GC Reline II Extra Soft Cartridge
Soft silicone-based relining material. Reline II Extra Soft is an A-silicone material providing comfort and elasticity for indications such as sensitive mucosa and pressure points. It will also support the healing process after extractions or implant surgeries. With a Hardness of 32 (Shore A), GC Reline II Extra Soft is a resilient material. It can stay in place for days or weeks. Indications - Suitable for chairside and lab relining procedures:- Relining of dentures in case of thin sensitive mucosa and resorbed ridges Relining of dentures in case of sharp and bony ridges Relining of dentures in case of bony undercuts (with difficulties involving insertion and/or removal of the denture) Relining of implant-supported dentures Advantages:- Helps wound healing thanks to an extremely soft consistency Normalises irritated tissue before you produce, reline or rebase a denture Can stay in place for days or weeks Convenient cartridge delivery Ideal viscosity, flowing under pressure to adapt to anatomical details Long lasting comfort & gentle relief: the material’s surface remains elastic, smooth and clean over time Reline II Primer for Resin provides a long-lasting adhesion to the underlying denture Reline II Remover for Resin makes it possible to easily remove & replace the relining layer Reline II Finishing Material can be used to further seal the marginsIFR626 (48ml (57g)) GC code: 10001359
£64.57
-
SS White Willis Bite Gauge
SS White Willis Bite Gauge - simple instrument for measuring vertical dimensions during patient assessment prior to denture construction. Autoclavable.IXW010 (Each) SS White code: ZZBGSSW
£59.95
-
Kerr Snow White Plaster
Type 2. Snow White is a quick setting and reliable plaster. It is popularly used for impressions, articulation, soldering transfers, labial/occlusal indices and the fabrication of temporaries.JPS405 (4.5kg) Kerr code: 60113
£45.84
-
UnoDent Iwansson Gauge
Made of stainless steel. A very useful instrument for checking the wall thickness of crowns etc. The thickness can be read directly on the scale with an accuracy 1/10 of a mm. It is also recommended for rigid materials such as porcelain, gold etc. Autoclavable.EXG610 (Each) UnoDent code: EXG610
£26.91
-
UnoDent Adaptor For Interdental Stripper
Fits most slow speed straight handpiecesBHU520 (Each) UnoDent code: BHU520
£26.70
-
GC Impression Separation Wafers
Polyethylene spacer wafer for double impression techniques. Separation wafers, consisting of 1 mm thick polyethylene foam, are intended to create space in a first GC EXA'lence or GC Exaflex Putty impression to be used later as a custom tray. The even space of 1 mm throughout guarantees an equal distribution of the wash impression material. This results in full advantage being taken of the elasticity of the impression material, allowing easy removal of the final impression with no permanent deformation. The separation wafers are suitable for both upper and lower arch impressions.JWG000 (Pack 30) GC code: 10001799
£39.47
-
Ivoclar Vivadent IPS e.max Ceram Transpa Incisal 2
IPS e.max Ceram is suitable for efficient standard layering as well as for demanding high-end layering with lifelike play of light. The classic Dentin and Incisal materials are ideally coordinated with more opaque all-ceramic framework structures and thus are ideally suitable for the veneering of more opaque substructures. Brightness and chroma are balanced. Therefore, an optimum shade match with the A-D shade guide is achieved. IPS e.max Ceram Incisal and Transpa Incisal demonstrate a slight fluorescence and opalescence similar to natural enamel. The high stability and excellent modelling properties enable a quick and true-to-detail layering of natural-looking incisal edges and occlusal surfaces.JCI331 (100g) Ivoclar Vivadent code: 605515
£178.64
-
Ivoclar Vivadent IPS e.max Ceram Transpa Neutral 100g
IPS e.max Ceram is suitable for efficient standard layering as well as for demanding high-end layering with lifelike play of light. The classic Dentin and Incisal materials are ideally coordinated with more opaque all-ceramic framework structures and thus are ideally suitable for the veneering of more opaque substructures. Brightness and chroma are balanced. Therefore, an optimum shade match with the A-D shade guide is achieved. The non-shaded Transpa materials are available in two gradations. Depending on customer demands and patient requirements, the Transpa materials may be used alone or mixed with other materials.JCI327 (100g) Ivoclar Vivadent code: 605519
£178.64
-
Ivoclar Vivadent IPS e.max Ceram Dentin B2 100g
IPS e.max Ceram is suitable for efficient standard layering as well as for demanding high-end layering with lifelike play of light. The classic Dentin and Incisal materials are ideally coordinated with more opaque all-ceramic framework structures and thus are ideally suitable for the veneering of more opaque substructures. Brightness and chroma are balanced. Therefore, an optimum shade match with the A-D shade guide is achieved. The IPS e.max Ceram Dentin materials have been designed in such a way that easy and reliable shade reproduction can be achieved irrespective of the material used for the substructure. The high stability and excellent modelling properties enable quick and uncomplicated layering.JCI234 (100g) Ivoclar Vivadent code: 605503
£178.64
You have seen 72 out of 486 products