Equipment
-
AirLabs AirHavn Pro Air Purifier
Safely maintain patient throughput and help protect healthcare workers from airborne virus transmission. Airborne viruses are known to remain suspended and alive in the air for hours, allowing transmission even after the departure of the source. AirHavn Pro provides an additional layer of protection to front line healthcare workers by flooding rooms and corridors with large amounts of clean air, reducing exposure to airborne viruses. The high level of air exchanges quickly removes airborne virus particles in just a few minutes. Air filtration provides an extra layer of protection in critical environments by removing airborne viruses and contaminated particulate matter that are known pathways of virus transmission. While the ability of a filter to remove airborne particles is critical, so too is the amount of clean air that the device can produce. The Clean Air Delivery Rate (CADR) combines both the filtration efficiency and the air flow rate. To be effective, an air filtration system needs to be able to produce enough clean air to outperform the sources of contamination. Key Features:- High Air Flow Capacity: Delivers a massive CADR of 705 m3/hr, enough to provide 24 air exchanges per hour in a typical dental surgery room Electrostatic Precipitation (ESP) Filter: The electrostatic cell filters 99% of particles less than 2.5µm while maintaining high airflow rates. The filter is maintained through simple annual cleaning. Engineered Nano-Carbon (ENC) Filter: The unique ENC filter removes toxic gas pollutants such as ozone, NO2 and VOCs that can be present within buildings and adversely affect respiratory health. Low Total Cost of Ownership. Compact Design: The AirHavn Pro unit occupies only 0.14m2 of floor space, yet delivers 705m3/hr of clean air. Mounted on wheels, the compact unit can easily be moved to where it is needed most Low Power/Low Noise: Consumes only 125W of power, on the highest fan speed, at an ultra quiet 51dB.. Operation: The AirHavn Pro is easy to operate and maintain. Plug-and-play, it can be set up in minutes and has three low noise fan speeds controlled directly on the device. The microprocessor independently controls the performance of the device so that the filtration level can be adjusted to the specific operating conditions. The front control panel reports any faults and indicates when the electrostatic cells need to be cleaned. The device requires a minimum amount of maintenance. With four castor wheels, including two with a braking mechanism, the AirHavn Pro is easy to move and secure in place. Technical Specification:- Power consumption 125W at highest speed Voltage input 240 V @ 50/60 Hz Dimensions H x W x D 840 x 468 x 303 mm Weight 30 kg Certificates EC Declaration of Conformity Directive 2006/42/EC IEC 60335-2-65 Warranty on electronic components & motor: 2 YearsQTA005 (Each)
£2,760.22
-
W&H Osmo Starter Kit
The Osmo supplies multiple sterilizers simultaneously with top quality demineralized water High quality demineralized water guarantees consistent, optimal performance and extends the life of your sterilizer and of your instruments. The system connects to mains water and produces a large quantity of demineralized water free from minerals and contaminants. Osmo fills and drains up to 6 sterilizers automatically and simultaneously The water storage tank has a capacity of seven litres. This makes Osmo not only the cost-effective solution for regions with poor water quality, but also for practices with a high water demand. Osmo has a spray gun for manual filling of otherdevices or for rinsing instruments prior to sterilization. In compliance with EN 1717 1 Year WarrantyQHW045 (Each) W&H code: 19721140
£1,543.00
-
Fellowes AeraMax Pro IV PC Air Purifier - Wall Mounted
DD has been appointed exclusive distributor of AeraMax Professional air purifiers by global manufacturer Fellowes Brands. The agreement means DD will be the sole supplier of the air treatment systems to dental practices across the UK. The rapid spread of COVID-19 has forced us all to rethink about our cleaning and hygiene regime. In recent tests, researchers found viable coronavirus samples could live for up to two to three days on plastic and stainless-steel surfaces. During these tests, the researchers also found the coronavirus could be detected in the air up to three hours after emission. It’s therefore safe to say that a complete hygiene solution should involve air, hand and surface cleaning. AeraMax Professional air purifiers effectively capture 99.97% of airborne contaminants, including flu viruses, germs, allergens and odours, resulting in clean air and a healthier environment for dental practice staff and patients. AeraMax Professional cleans the air in four steps. The pre-filter removes larger particles including dust. The activated carbon filter eliminates unpleasant medicinal odours from the practice. The HEPA filter captures particulate matter (PM2.5 and PM10) and also all bacteria, viruses and allergens. A plasma ioniser then electrically charges the last particles to enhance filtration and introduce noticeably clean air that smells fresher. AeraMax Professional can make an immediate impact in most indoor environments, including: Dental treatment rooms - removing up to 99.97% of airborne contaminants Waiting rooms - the patented EnviroSmart Technology automatically detects when to purify the air, reducing contaminants quickly and efficiently. Changing rooms and toilets - Harmful germs and unpleasant smells make way for a cleaner, healthier environment AeraMax Pro IV PC Air Purifier:- Wall Mounted- The right size for large spaces. The AeraMax Professional IV is the largest of our commercial grade air purification systems and will deliver an air change every 20 minutes in rooms up to 110m². Multiple units can be used for larger spaces making it the ideal solution for open office layouts, large conference rooms and many large shared air spaces Specifications:- Smart Technology: PureView Technology, EnviroSmart Technology Area Coverage:65m² (5 ACH), 110m² (3 ACH) No. of Fan Speeds: 5 Airflow (m3/hour): 260, 316, 381, 476, 748 Sound Pressure Levels (dB): 42, 44, 51, 53, 68 System Dimensions (HxWxD): 499 x 531 x 228mm System Weight:15.1kg Power Consumption (W): 8, 12, 18, 35, 166 Energy Star Certified: Yes Power Requirements: 220-240V, 50/60Hz, 1.4A Electical Safety Certification: TUV, GS, CE Air Intake / Outlet: Bottom / Top Control Panel: Capacitive Touch & TFT LCD PureView Screen Housing Material: UV Stabilised ABS Operating Temperature: 5°C-40°C Operating Humidity: Up to 60% RH Warranty: 5 Year LimitedQTA025 (Each) Fellowes code: 9573901
£1,477.33
-
Fellowes AeraMax Pro IV Air Purifier - Floor Stand
DD has been appointed exclusive distributor of AeraMax Professional air purifiers by global manufacturer Fellowes Brands. The agreement means DD will be the sole supplier of the air treatment systems to dental practices across the UK. The rapid spread of COVID-19 has forced us all to rethink about our cleaning and hygiene regime. In recent tests, researchers found viable coronavirus samples could live for up to two to three days on plastic and stainless-steel surfaces. During these tests, the researchers also found the coronavirus could be detected in the air up to three hours after emission. It’s therefore safe to say that a complete hygiene solution should involve air, hand and surface cleaning. AeraMax Professional air purifiers effectively capture 99.97% of airborne contaminants, including flu viruses, germs, allergens and odours, resulting in clean air and a healthier environment for dental practice staff and patients. AeraMax Professional cleans the air in four steps. The pre-filter removes larger particles including dust. The activated carbon filter eliminates unpleasant medicinal odours from the practice. The HEPA filter captures particulate matter (PM2.5 and PM10) and also all bacteria, viruses and allergens. A plasma ioniser then electrically charges the last particles to enhance filtration and introduce noticeably clean air that smells fresher. AeraMax Professional can make an immediate impact in most indoor environments, including: Dental treatment rooms - removing up to 99.97% of airborne contaminants Waiting rooms - the patented EnviroSmart Technology automatically detects when to purify the air, reducing contaminants quickly and efficiently. Changing rooms and toilets - Harmful germs and unpleasant smells make way for a cleaner, healthier environment AeraMax Pro IV Air Purifier - Floor Stand:- The right size for large spaces. The AeraMax Professional IV is the largest of our commercial grade air purification systems and will deliver an air change every 20 minutes in rooms up to 110m². Multiple units can be used for larger spaces making it the ideal solution for open office layouts, large conference rooms and many large shared air spaces Specifications:- Smart Technology: EnviroSmart Technology Area Coverage:65m² (5 ACH), 110m² (3 ACH) No. of Fan Speeds: 5 Airflow (m3/hour): 260, 316, 381, 476, 748 Sound Pressure Levels (dB): 42, 44, 51, 53, 68 System Dimensions (HxWxD): 499 x 531 x 228mm System Weight:15.1kg Power Consumption (W): 8, 12, 18, 35, 166 Energy Star Certified: Yes Power Requirements: 220-240V, 50/60Hz, 1.4A Electical Safety Certification: TUV, GS, CE Air Intake / Outlet: Bottom / Top Control Panel: Capacitive Touch Housing Material: UV Stabilised ABS Operating Temperature: 5°C-40°C Operating Humidity: Up to 60% RH Warranty: 5 Year LimitedQTA027 (Each) Fellowes code: 9451301
£1,456.52
-
BOFA DentalPRO Aerosol
The DentalPRO Aerosol helps to reduce the risk of cross contamination between dental staff and patients during treatment. With a market leading airflow system to ensure optimum capture of aerosol extra-orally, it is designed to work alongside appropriate PPE and regular intra-oral suction. The DentalPRO Aerosol works to disrupt the directional airflow to filter aerosol direct from the patient, ejecting filtered air away from dental staff breathing zones. It is simple to use and maintain, and there is no need to vent outside as the filtered air is sent back into the room following filtration. Its three-stage filtration includes a HEPA filter which removes 99.997% of particles at 0.3 microns. Due to the large adjustable flow rate, the DentalPRO Aerosol may be used during a variety of procedures and can be turned to maximum capacity for applications that involve heavier aerosol generation. With a sleek design, this is an ideal addition to any dental setting, offering maximum protection and minimal interference. Technology:- DeepPleat pre filter HEPA filter Advanced carbon filter technology Multi voltage sensing unit ProTECT service plan SureCHECK quality standard Key Features:- Three stage filtration - F8 Pre filter / HEPA / Gas filter Standard Complete with filter condition indicator Standard Low noise level Standard Digital air flow control Standard VOC Sensing (Volatile Organic Compound), Optional Dimensions (HxWxD) 840 x 475 x 550mm (without arm / spigot) Cabinet construction Powder coated mild steel Blower Centrifugal turbine Airflow 240m3/hr Electronics 90 - 257v 1ph 50/60Hz Full load current: 12.5 amps Noise level < 64dBA (at typical operating speed) Weight 54kg Arm size 50mmQTA010 (Each) BOFA code: 30351675-1127
£2,216.95
-
Fellowes AeraMax Pro IV Air Purifier - Wall Mounted
DD has been appointed exclusive distributor of AeraMax Professional air purifiers by global manufacturer Fellowes Brands. The agreement means DD will be the sole supplier of the air treatment systems to dental practices across the UK. The rapid spread of COVID-19 has forced us all to rethink about our cleaning and hygiene regime. In recent tests, researchers found viable coronavirus samples could live for up to two to three days on plastic and stainless-steel surfaces. During these tests, the researchers also found the coronavirus could be detected in the air up to three hours after emission. It’s therefore safe to say that a complete hygiene solution should involve air, hand and surface cleaning. AeraMax Professional air purifiers effectively capture 99.97% of airborne contaminants, including flu viruses, germs, allergens and odours, resulting in clean air and a healthier environment for dental practice staff and patients. AeraMax Professional cleans the air in four steps. The pre-filter removes larger particles including dust. The activated carbon filter eliminates unpleasant medicinal odours from the practice. The HEPA filter captures particulate matter (PM2.5 and PM10) and also all bacteria, viruses and allergens. A plasma ioniser then electrically charges the last particles to enhance filtration and introduce noticeably clean air that smells fresher. AeraMax Professional can make an immediate impact in most indoor environments, including: Dental treatment rooms - removing up to 99.97% of airborne contaminants Waiting rooms - the patented EnviroSmart Technology automatically detects when to purify the air, reducing contaminants quickly and efficiently. Changing rooms and toilets - Harmful germs and unpleasant smells make way for a cleaner, healthier environment AeraMax Pro IV Air Purifier - Wall Mounted:- The right size for large spaces. The AeraMax Professional IV is the largest of our commercial grade air purification systems and will deliver an air change every 20 minutes in rooms up to 110m². Multiple units can be used for larger spaces making it the ideal solution for open office layouts, large conference rooms and many large shared air spaces Specifications:- Smart Technology: EnviroSmart Technology Area Coverage:65m² (5 ACH), 110m² (3 ACH) No. of Fan Speeds: 5 Airflow (m3/hour): 260, 316, 381, 476, 748 Sound Pressure Levels (dB): 42, 44, 51, 53, 68 System Dimensions (HxWxD): 499 x 531 x 228mm System Weight:15.1kg Power Consumption (W): 8, 12, 18, 35, 166 Energy Star Certified: Yes Power Requirements: 220-240V, 50/60Hz, 1.4A Electical Safety Certification: TUV, GS, CE Air Intake / Outlet: Bottom / Top Control Panel: Capacitive Touch Housing Material: UV Stabilised ABS Operating Temperature: 5°C-40°C Operating Humidity: Up to 60% RH Warranty: 5 Year LimitedQTA024 (Each) Fellowes code: 9451001
£1,378.50
-
Ivoclar Vivadent Bluephase PowerCure 100-240V
Product Features- 3sCure Program: Light intensity of 3,000 mW/cm² for curing times starting from 3 seconds Turbo Program: Light Intensity of 2,000 mW/cm² for curing times starting from 5 seconds High Power program: Light intensity of 1,200 mW/cm² for curing times starting from 10 seconds Cordless design for ultimate mobility in the dental office Intuitive handling with 2-button operation Inductive charging of the battery, no contaminated charging contacts Charging base with information of the charging status High-performance lithium ion battery for an operating capacity of 20 min. within the High Power program Light guide: shortened and autoclavable 3-year warranty (battery 1 year) Homogeneous light emission performance Backlit display for optimized hygiene Radiometer integrated in the charging base Optional corded operation with "Click & Cure"QCV135 (Each) Ivoclar Vivadent code: 667092AG
£1,516.34
-
Kerr Demi Plus LED Curing Light
The Demi Plus is a Light Emitting Diode (LED) curing light. Thanks to the PLS technology, the Demi intermittently shifts output intensity from an impressive base of 1100mW/cm2 to a peak of 1330mW/cm2. This enables the Demi Plus to deliver a 5-second cure for A3 or lighter shades. Demetron’s unique thermal control system ensures a cool, continuous high output without a risk of overheating intrapulpal tissue. High power LED curing light featuring Periodic Level Shifting (PLS) technology Increased curing ability and shorter curing times (5-second cure for A3 and lighter shades) Cool, continuous high output thanks to Demetron’s unique thermal control system Cordless, ergonomic design 5-, 10- and 20-second pre-set timer settings Timer mode recall No down time; 1 Lithium-ion battery included 500 x 5-second cures with fully charged battery 8 mm curved turbo light guide included Interchangeable Light Guides: Accepts all Demetron light guides from 2 mm through 13 mmQCK120 (Each) Kerr code: 910860-2
£1,411.00
-
Ivoclar Vivadent Bluephase G4 100-240V Grey
Intelligent LED light – carefree curing Patented Polyvision technology is your personal assistant when it comes to curing entalmaterials. This automatic assistance system helps you achieve reliable curing results. The curing light automatically detects movement of the handpiece during the light-curing procedure. It alerts the user of the improper operation by vibrating and automatically extends theexposure time by 10 per cent, if necessary. If the movement may prevent the material from curing properly, the light will automaticallyinterrupt the exposure cycle so that it can be repeated. Bluephase G4 comes with active anti-glare protection to prevent the light frombeing activated in open space. Advantages: Reliable curing performance for all light-curing materials due to polywave LED Short curing times starting from 10 seconds due to a high intensity of 1.200 mW/Cm2 Wide 10-mm light guide for time-saving single-exposure curing procedures Additional Pre-Cure program Contents: Complete unit incl. charging station, handpiece, light probe 10 mm, protective sleeves, anti-glare cones, instructions for useQCV133 (Each) Ivoclar Vivadent code: 691258AG
£1,173.94
-
Renfert Renfert Vario Basic Sandblaster 220-240V without tanks
This all-round blasting unit is combined recyclable blaster and fine sandblasting unit. Its compact construction and multipurpose function is ideal for medium-sized and small labs. This economical unit can carry out all the usual blasting tasks required within dental technology. All the advantages of Renfert microblasting and recycling sandblasting technology are combined in one unit that requires minimum space. Function & Performance: The compact combination of recycling sandblaster and microblaster. A cost- effective, multifunctional solution for all relevant sandblasting work in the dental laboratory. Advantages:- Can be upgraded with 1 to 4 microblasting tanks. 50% less abrasive consumption due to intelligent extraction system (only unusable fine dust is removed) PerfectView: Innovative LED Technology for best contour and detail recognition. Details:- Individually adjustable recycling nozzle with the integrated Venturi principle and efficient sandblasting. Highly resistant coated glass panel. Replaceable, washable cuffs. Powder-coated metal housing. Internal tank selection switch for each microblaster tank, recycling sandblast operation or choice of an external compressed air unit. IT-Handpiece with exchangeable nozzles. Filter control with manual water separator for cleaning the supplied compressed air. Highly resistant boron carbide nozzle optionally available. Inlet opening and connection for a compressed air driven unit (e.g. deflasking chisel).QYU210 (Each) Renfert code: SRE802
£2,350.81
-
Uni-Jet 75 Induction Motor Dry Line
The Uni-Jet 75 Induction Motor for single surgery use produces the high airflow and vacuum necessary for the efficient removal of the nebulised spray created by high speed turbines. The motor is protected by thermal switch. The Uni-Jet is virtually manintenance free with a life expectancey of 5 - 10 years.QTC006 (Each) Cattani code: 020322
£984.00
-
Coltene S.P.E.C. 3 LED Curing Light
The S.P.E.C. 3 curing light defines performance without compromise. Chair time can be effectively reduced due to rapid and deep polymerization on various light cured materials. The sealed aluminum body ensures quick and easy disinfection between patients. The powerful Lithium Polymer Battery offers enough storage capacity to perform over 300 ten-second cures between charges. The Coltene S.P.E.C. 3 features multiple curing modes for maximum functionality in any clinical situation. cures 2mm deep in one second three Distinct Power Modes ergonomic lightweight design Multiple modes: Standard Mode: Ideal for most composite curing scenarios. 3K Mode: For rapid curing when time is an issue, like pedo or patients with gag reflex. Ortho Mode: Cures an entire full-arch of brackets with 2 three second intervals per bracket Contains: 1 x Handpiece, 1 x Charger Base, 1 x Power Supply Plug Type G, 1 x Black Light Guide 11mm, 1 x 2 pcs Light Shield, 1 x 100 pcs Barrier SleeveQCC100 (Each) Coltene code: 60013943
£978.04
-
Kerr Demi Plus Handpiece Only
Demi Plus Handpiece OnlyQCK126 (Each) Kerr code: 921920-1
£861.29
-
Kerr 11mm Turbo Light Guide
Curved Turbo Light Guide 11mm. Increases efficiency of light output and reduces overall curing time. Demetron light guides compatibility with Demetron Curing Light: All LED, Demi and All HalogenQCK115 (Each) Kerr code: 921551
£373.73
-
SDI Radii Xpert LED Curing Light
Professional LED Curing Light Smarter design. Optimal cure every time. Target assist precision curing:- Radii Xpert’s unique target assist technology enables you to correctly position the light and be confident of the angulation before curing. A light source must be held close and perpendicular to a restoration to avoid incomplete polymerization. By activating the positioning light and releasing once over the tooth, you can be sure that curing only begins when the light is in position and restorations will receive a complete cure. Ensure you are on target every time with Radii Xpert. Collimated light:- Radii Xpert is the ideal choice for restorations of all sizes, including bulk fill restorations that require a deep cure. The collimated beam ensures light intensity is maintained on the restoration being cured. Achieve a predictable cure, every time with Radii Xpert. Smart technology for ease of use:- Smart technology improves the efficiency of your dental appointment. A LCD display with countdown timer eliminates estimation and provides accuracy during a curing cycle. Radii Xpert gives you the ability to save your favourite setting and the multi-coloured status rings offer a visual representation when you need to charge or when curing is in progress. Ergonomically well-balanced grip:- Radii Xpert’s ergonomic design allows you to comfortably access all restoration sites. The 360-degree rotatable head enables restorations in all quadrants to be accessed easily. Radii Xpert has a well-balanced slimline design and can be held in a pencil or pistol grip, minimising hand and arm fatigue. Contains: 1 x Radii Xpert handpiece, 1 x charger, 1 x multi-region plug pack, 5 x small light shields, 1 x large light shield, 3 x spare lens caps, 100 x barrier sleeves Radii Xpert LED curing light has a 3 year warranty. Battery has a 2 year warranty.QCS000 (Each) SDI code: 5600300
£1,077.24
-
Daray Daray LED Dental Light Excel Upgrade Kit
Daray’s LED Upgrade Kis for conversion of older* Daray Halogen Dental Light range This new addition to the Daray range has been designed specifically with customers in mind, offering you a choice, based on your lighting preference AND your budget. Allowing your practice to enjoy the benefits, cost-savings, and practicality of LED Dental Light technology without the costs associated with replacing the entire fixture. The Daray Upgrade Kit will utilise your existing arms and mount, ensuring that your business is not disrupted by building work or downtime. Using Daray's bespoke adaptor, a new LED light head, and a replacement power supply, we can transform your existing light into a modern, technologically advanced, energy-efficient dental light – for a fraction of the cost of replacing the whole unit. Daray take pride in guaranteeing that their lights will provide exceptional benefits for your practice. You will immediately be impressed with the potential savings opportunities, which can be measured in several ways: First, we are competitively priced to keep your initial cost to a minimum. Second, the quality makes them outstanding value. Third, the running costs are amazing too. *Compatible with the following dental light models: BiLite, DL50, QiLite, Wavelite. Cylindrical-arm type versions only: 2005 onwardsQOD019 (Each) Daray code: EXCELUK
£841.49
-
Dentsply Sirona SmartLite Focus Intro Kit
The SmartLite Focus curing light is a cordless pen-style, LED light polymerization device with exchangeable battery pack. It has an individually adjustable LED tip, rotatable by 330°, providing maximum light output and a polymerization area of a minimum of 7.5mm in diameter. The SmartLite ensures the recommended depth of cure for most Dentsply Sirona light-curing restoratives even up to an 8mm distance. Instantly ready to use upon purchase without need for initial charging. The replaceable battery pack offers stable energy output even after prolonged storage. Reliable light curing over larger distances Homogeneous performance within the curing area Excellent Intra-oral access Easy one-touch handling One mode for direct and indirect restorations Virtually permanent availability Contains 1 x SmartLite Focus, 1 x SmartLite Focus Charging Base, 1 x SmartLite Focus Battery Pack, 5 x SmartLite Focus Shields, 300 x SmartLite Sleeves (for Focus and PS), 1 x SmartLite Focus Power Connector, 1 x instructions for use, 1 x material curing guide.QCD080 (Each) Dentsply Sirona code: 64450020
£878.11
-
Durr Single Use Container Kit
2 x 2 litre container for disposable bags. Included in set are disposable bags & disposable hoses plus fixing parts.QTD142 (Each) Durr code: 0670-987-00
£605.00
-
3M Elipar DeepCure-L LED Curing Light
The Elipar DeepCure LED Curing light has been designed to give a better depth of cure, giving Dentist’s increased confidence of polymerisation deep in the cavity when using bulk fill composites. With a choice from two models to match their preference: a high-quality, durable stainless steel version, or an equally high-performing lightweight model. Elipar DeepCure LED curing lights can be used with all 3M materials to produce reliable results, Filtek Composites, Scotchbond Universal Adhesive, RelyX Cements, Clinpro Sealant. Wavelength 430-480 nm. Light intensity 1.470 mW/cm2 (-10%/+20%). Lithium-ion battery. Curing time 10 seconds for many composites. For dentists who want high performance in a lightweight model. Robust plastic housing, Fan-free for silent operation, Weight 180g, Vent-free for fast and easy cleaning and disinfection, Built-in battery, Charging plug (charging time for drained battery approx. 120 min). Contains: Handpiece (built-in Li-ion battery); Universal Power Supply with 5 adaptors; 10mm Light Guide; Eye Shield; 3 Curing Discs. 76973QCE050 (Each) 3M code: 76973
£782.24
-
Luxo Wave LED Task Light & Magnifier
A magnifier for industrial applications. Wave LED offer shadow free magnification with light coming from both sides, as well as three dimensional magnification with light coming from the left or right. The 3D feature is especially welcome when working with circuit boards and similar delicate objects. With its rectangular lens, Wave LED is also suitable for reading purposes. Maximum flexibility and precision The flexibility of the joint between lamp head and arm makes exact positioning easy. The spring balanced arm provides maximum vertical and horizontal movement, and will always stay in the right position without drifting. The standard version is supplied with a 3.5 or 5 diopter glass lens. A cloth cover is provided to protect the lens from dust and to prevent the luminaire from inadvertently turning into a burning glass. LED: Light source of the future! Wave LED is equipped with two 6 W LED modules, which are lit individually. The modules are dimmable, and automatically turn themselves off after 4 or 9 hours in order to save energy. Light emitting diodes have an incredibly long life span. The diodes in Wave LED have a life expectancy of 50.000 hours. That means 25 years or more with normal use. You will never have to change the light source. Illuminated magnifiers are recommended by the Department of Health for use to inspect instruments for cleanliness and when checking if any instruments are blunt, bent or damaged or show any signs of pitting or other corrosion. An illuminated magnifier is recommended because it makes it much easier to see residual contamination, debris or damage (HTM01-05).QOL020 (Each) Luxo code: WAL025952
£486.17
-
W&H MultiDem Water Filter System C27
The water demineralization system Multidem supplies top quality demineralized water for generating steam in autoclaves. As a result, it ensures consistent and optimized performance, thereby extending the service life of your sterilizer or purification unit. Advantages- Spent filter cartridges can be replaced quickly and easily without tools. Multidem is suitable for use with many conventional autoclaves and purification units. The spray gun can also be used to fill the sterilizers manually with demineralized water. For Multidem no external power supply is required. The water demineralizer system delivers consistently high water quality thus preventing limescale deposits in sterilizers. Consists of: filter head, 2.7 kg cartridge, tubes and connectors (incl. Water Block®) Width/depth/height: 124 / 123 / 476 mm For more information or to place an order please call The Decon Team on 01786 460 600QHW011 (Each) W&H code: 19723112
£689.00
-
AirLabs AirBubbl Vehicle Purifier
AirBubbl: In-car air filtration device: An advanced air purifier that protects you and your passengers from air pollution, a major contributing factor to many forms of disease including: heart disorders, stroke, pulmonary cancer and lung cancer. The AirBubbl helps protect the developing respiratory functions of infants and gives extra protection to those who suffer from asthma or allergies. The key pollutants removed include gaseous pollutants such as Nitrogen Dioxide (NO2), Ozone and Volatile Organic Compounds (VOCs). It also removes particulates such as dust, pollen, soot, fibres, PM2.5 and PM10, along with bacteria and viruses. Nano Carbon Filter: The unique activated nano carbon filter removes up to 95% of nitrogen dioxide and other gaseous pollutants effectively — the only type of filter that can absorb the harmful gases and keep them locked away. Effectively removes up to 95% of gaseous pollutants, such as nitrogen dioxide (NO2), within 10 minutes. High Grade Particle Filter: The high-grade particle filter removes particulate matter efficiently. This includes dust, pollen, soot, fibres, PM2.5 and PM10. Viruses and bacteria are very efficiently removed by the AirBubbl, as the capabilities of the particle filter extends to the very finest particles. Patented Airflow Design: Vehicle occupants breathe cleaned air faster with the AirBubbl due to its patented airflow design. Powerful Dual Fan: The powerful dual fan design efficiently delivers clean air back to the driver and passengers. Mobile Application: iOS and Android app featuring remote control and air flow management statistics. Users can collect achievement badges reflecting the quantity of air cleaned in the vehicle. Accessories Included: Quick Start Guide, High quality 2m USB-C cable, Dual USB car power adapter, Adhesive cable clips. The AirBubbl can reduce exposure to airborne COVID-19 and is one of several measures that can be taken to help project passengers insides a vehicle Technical Specifications:- Advanced car air purifier with unique nano carbon filter and patented airflow design Filter type: AirLabs’ filter cartridge contains a high grade particle filter, along with a patented nano carbon layer, allowing for highly effective removal of particulate matter (PM) and nitrogen dioxide (NO2) as well as VOCs, ozone and other pollutants. Filter lifetime: 1000 hours Filter replacement indicator: Yes Airflow: 30 m3/h Speed settings: 2 settings, normal or boost mode Control: Manually or via AirBubbl app App: Compatible with Android and iOS devices. System requirements: iOS 8.0+, iPhone 4s or later, iPod touch (5th Gen or later), Android Snapdragon or later. Colour: Space grey, brushed aluminium, grey fabric cover, grey strap Size: 31x12cm Weight: 0.8kg Noise level: 44 dBA in Normal mode, 48 dBA in Boost mode Power supply: USB-C inlet. 5V, 2.1 A (10W). Powered via USB to car power adapter or other suitable USB power supply (5V, 2.1A). CE Tested and conformed to following standards: Electromagnetic Compatibility: EN 301 489-1 V2.2.0, EN 50498: 2010, EN 55014:2017 Radio emissions: EN 300 328 V2 1.1 Health: EN 62479:2010 Safety: EN 60950, EN 60335QTA000 (Each)
£308.76
-
Kulzer Starlight Pro LED Curing Light - Cordless
Safe and effective polymerisation Starlight pro is a LED curing light for the polymerization of light curing dental material such as adhesives and filling materials. The primary task of light polymerization with Starlight pro is to consistently produce high-quality and safe restauration. Cordless Pen-style body: The light-weight and ergonomic pen-style design enables an effort-less handling even for small hands. Further-more the advanced angle of the 360° rotatable light guide allows a better access to the molar region and the cordless design gives maximum freedom of movement. Reliable performance: Starlight pro comes with a strong and long-life Li-ion battery, without Memory-Effect and a recharging time of just 120minutes. That means 320 applications in 10sec mode, with maximum light intensity. The built-in radiometer enables to check the performance of the curing light – result indicated by a LED. Save use: The simple connection between Handpiece and Light-Guide exclusively metallic coupling ensures optimal light transmission. Starlight pro also offers constant light power regardless the charge level. A double acoustic signal is activated when the battery is still sufficient for 6 cycles and it does not require a fan as it develops no heat, therefore noiseless. The smooth, continuous and compact surface enables perfect disinfection. The fibre optics conductor – Ø 8 mm is also sterilizable, as well the optical protection, which is easy attached Technical Data: Power Density - 1400 mW/cm² (measured with Cure Rite) Wave length - 440-480 nm Demension charging unit - 96x120x58 mm (LxWxH) Demension hand piece - L 190 mm, Ø max 23 mm Weight - Charging Unit 555 g, hand piece 105 g Power Supply (charging unit) - 100-240 V(AC), 50/60 Hz, 15 VA Power Supply (hand piece) - Rechargeable lithium-ion-battery 3.6V/2000mAh Light Source - High-luminosity mono-die LED Light guide - Ø 8mm, 45° Contains - Hand piece incl. rechargeable battery, 8 mm light guide 45°, glare shield, charging unit & power supply. The Starlight Pro carries a 3-year warranty, excluding the light guide.QCK084 (Each) Kulzer code: 66096848
£540.53
-
Vinyl Master DS4N Stool Nurses Double Curvature Backrest - Black
Nurses model Round seat diameter 16". Height adjustment 21" to 27". Double Curvature Backrest. Stool key features: Free-floating seat and backrest 12 inch Hydraulic lift height-adjustment Five-point polished aluminium base Smooth-running castors Easy-clean upholstery Double-density cushioning Chrome footringQNV011 (Each) Vinyl Master code: DS4N
£405.94
You have seen 24 out of 510 products