Finishing & Polishing
-
UnoDent Refills TC Trimmer Cross Cut Bullet Standard
TC Trimmer Cross Cut Bullet StandardKUO006 (Each) UnoDent code: KUO006
£17.99
-
Diatech Composhine Ref. 2203.1 Midi-Point
For high-lustre polishing of all types of composites and compomers. Mounted RA. Light grey: For high-lustre polishing.KDP023 (Pack 10) Diatech code: 230076AA
£18.66
-
Diatech Composhine Ref. 2201.1 Mini-Point
For high-lustre polishing of all types of composites and compomers. Mounted RA. Light grey: For high-lustre polishing.KDP021 (Pack 10) Diatech code: 230072AA
£18.66
-
Shofu Dura-White Stones Flame FL-2 RA (Ref. 0223)
Vitrified-bonded aluminium oxide stones For finishing of enamel, glass ionomer cements, composites, porcelain and prepared tooth abutment, none exceeds the performance of Dura-White stones. Made of micrograined aluminium oxide grits, each â€Arkansas“ stone is perfectly balanced and suited for very fine finishing and smoothing of various dental materials. Benefits Precise concentricity Low vibration performance Consistent cutting action Economical High edge stability Long-lasting service life Wide range of shapes Indications Chairside Finishing and very fine working of e.g. composite or glass ionomer filling materials, porcelain, tooth enamel, e.g. smoothing crown preparations after contouring with diamond abrasives In the dental laboratory Very fine contouring and fine finishing of porcelain or composite restorations Suitable for the following materials: porcelain, composite, compomer, dental hard tissue, glass ionomer cementKSR223 (Pack 12) Shofu code: 0223
£19.10
-
Edenta Alphaflex Brown Flame 0030 RA
2-Step finishing and polishing system suitable for all precious and semi-precious alloys as well as composite. Polishers impregnated with high-grade polishing agents for rapid finishing without damaging the enamel. Step 1 = Brown: prepolishing (finishing) Step 2 = Green: lustre polishingKUD132 (Pack 12) Edenta code: 0030RA-12
£19.24
-
Shofu Porcelain Laminate Kit FG No 0318
Systematic polishing of porcelain and enamel in three steps. With the polishers Ceramisté Standard, Ceramisté Ultra and Ceramisté Ultra II this kit offers the proper instruments for each working step from prepolishing to high-gloss polishing. The assortment of Ceramisté polishers with midipoint and cup shapes is ideal for harmonising the marginal seals between porcelain and tooth enamel. The kit is also suitable for polishing porcelain veneers. Contents Ceramisté Standard: 4 each cup, midipoint Ceramisté Ultra: 2 each cup, midipoint Ceramisté Ultra II: 1 each cup, midipointKSR318 (Each) Shofu code: 0318
£24.72
-
Shofu Composite Finishing Kit RA No. 0306
For Composites & GIC. The Kit comprises of an assortment of abrasive stones that are designed for contouring and finishing aesthetic restorations. Features - This Kit is suitable for finishing direct resin as well as glass ionomer restorations. Fast and efficient contouring with Dura-Green Stones Fine finishing with Dura-White Stones High speed (FG shank) is recommended to save time The durable abrasive points are autoclavable and cost-effective. Recommended average speed: Dura-Green Stones: 5,000 – 20,000 rpm Dura-White Stones: 5,000 – 20,000 rpm For finishing interproximal and subgingival composite fillings. Contains: 6 Dura-Green and 6 Dura-White Stones in CN1 and FL2 shapes.KSR306 (Box 12) Shofu code: 0306
£21.11
-
Shofu T&F Hybrid Points (Micron Diamonds) 0937-1 - Bur No 7901
Ultra-fine diamonds for finishing of tooth enamel, porcelain and composite T&F Hybrid Points with their ultra fine diamond particles fulfill the requirements of modern, aesthetic dentistry regarding minimal corrections and best preparation for polishing. The instruments are available in ten different sizes and shapes for the different preparation steps and individually packed in plastic containers. Indications Chairside: Finishing of composites; very fine adjustments to tooth enamel and porcelain Benefits Exact, even distribution of very fine diamond particles Computerised manufacturing technique Consistent cutting action Ideal surface finish before final polishing Precise concentricityKSR938 (Pack 6) Shofu code: 0937-1
£25.80
-
Shofu Dura-White Stones Flame FL-2 FG (Ref. 0244)
Vitrified-bonded aluminium oxide stones For finishing of enamel, glass ionomer cements, composites, porcelain and prepared tooth abutment, none exceeds the performance of Dura-White stones. Made of micrograined aluminium oxide grits, each â€Arkansas“ stone is perfectly balanced and suited for very fine finishing and smoothing of various dental materials. Benefits Precise concentricity Low vibration performance Consistent cutting action Economical High edge stability Long-lasting service life Wide range of shapes Indications Chairside Finishing and very fine working of e.g. composite or glass ionomer filling materials, porcelain, tooth enamel, e.g. smoothing crown preparations after contouring with diamond abrasives In the dental laboratory Very fine contouring and fine finishing of porcelain or composite restorations Suitable for the following materials: porcelain, composite, compomer, dental hard tissue, glass ionomer cementKSR244 (Pack 12) Shofu code: 0244
£18.87
-
Shofu Dura-White Stones Point CN-1 FG (Ref. 0241)
Vitrified-bonded aluminium oxide stones For finishing of enamel, glass ionomer cements, composites, porcelain and prepared tooth abutment, none exceeds the performance of Dura-White stones. Made of micrograined aluminium oxide grits, each â€Arkansas“ stone is perfectly balanced and suited for very fine finishing and smoothing of various dental materials. Benefits Precise concentricity Low vibration performance Consistent cutting action Economical High edge stability Long-lasting service life Wide range of shapes Indications Chairside Finishing and very fine working of e.g. composite or glass ionomer filling materials, porcelain, tooth enamel, e.g. smoothing crown preparations after contouring with diamond abrasives In the dental laboratory Very fine contouring and fine finishing of porcelain or composite restorations Suitable for the following materials: porcelain, composite, compomer, dental hard tissue, glass ionomer cementKSR241 (Pack 12) Shofu code: 0241
£18.87
-
Diatech Comprepol Ref. 2103.1 Midi-Point
For pre-polishing and polishing all types of composites and compomers. Mounted RA. Yellow: For pre-polishing and polishing.KDP013 (Pack 10) Diatech code: 230059AA
£18.30
-
Kerr HiLuster Polishing System GlossPLUS Polishers Flame
High gloss results in only 2 steps with a system based on the Identoflex technology, meeting the highest standards Optimum flexibility of the polishing matrix for excellent adaptation to the restoration Pre- and gloss-polishing in one step by efficient GlossPLUS Polisher with integrated aluminium oxide particles Outstanding final result, achieving the highest aesthetic demands thanks to diamond particles integrated into the HiLusterPLUS Dia PolisherKGR010 (Pack 6) Kerr code: 2651
£20.93
-
Edenta Refills Cup Amalgam Reducer – Black
Cup Amalgam Reducer – Black 0935RA 060KUD126 (Pack 12) Edenta code: 0935RA-12
£18.82
-
Edenta Alphaflex Green Bullet 0131 RA
2-Step finishing and polishing system suitable for all precious and semi-precious alloys as well as composite. Polishers impregnated with high-grade polishing agents for rapid finishing without damaging the enamel. Step 1 = Brown: prepolishing (finishing) Step 2 = Green: lustre polishingKUD140 (Pack 12) Edenta code: 0131RA-12
£18.82
-
Westone Compoglaze Diamond Polishing Paste
Quality diamond polishing paste for composites, compomers, acrylics etc. Ideal for polishing Vita Enamic restorations.KWL040 (2.5g) Westone code: 80.PR035
£40.85
-
Shofu Dura-White Stones Taper Cylinder TC-4 HP (Ref. 0211)
Vitrified-bonded aluminium oxide stones. For finishing of enamel, glass ionomer cements, composites, porcelain and prepared tooth abutment, none exceeds the performance of Dura-White stones. Made of micrograined aluminium oxide grits, each â€Arkansas“ stone is perfectly balanced and suited for very fine finishing and smoothing of various dental materials. Benefits:- Precise concentricity Low vibration performance Consistent cutting action Economical High edge stability Long-lasting service life Wide range of shapes Indications Chairside Finishing and very fine working of e.g. composite or glass ionomer filling materials, porcelain, tooth enamel, e.g. smoothing crown preparations after contouring with diamond abrasives In the dental laboratory Very fine contouring and fine finishing of porcelain or composite restorations Suitable for the following materials: porcelain, composite, compomer, dental hard tissue, glass ionomer cementKSR211 (Pack 12) Shofu code: 0211
£18.50
-
Shofu Ceramisté Bullet Ultra RA (Ref. 0254)
For porcelain and tooth enamel Ceramisté silicone polishers were designed specifically for the polishing of porcelain and tooth enamel. The Ceramisté system consists of Ceramisté Standard, Ceramisté Ultra and Ceramisté Ultra II polishers for all polishing steps. Indications Systematic polishing up to a high gloss of porcelain and tooth enamel in three steps: Prepolishing: Ceramisté Standard Polishing: Ceramisté Ultra with yellow banded shank Final polishing: Ceramisté Ultra II with white banded shank. Benefits Three coordinated polishing steps Optimal ratio between speed and contact pressure Customisable Low vibration performance Long-lasting operating life No polishing paste is needed Shank WKSR254 (Pack 12) Shofu code: 0254
£18.96
-
Kerr HiLuster Polishing System GlossPLUS Polishers Cup
High gloss results in only 2 steps with a system based on the Identoflex technology, meeting the highest standards Optimum flexibility of the polishing matrix for excellent adaptation to the restoration Pre- and gloss-polishing in one step by efficient GlossPLUS Polisher with integrated aluminium oxide particles Outstanding final result, achieving the highest aesthetic demands thanks to diamond particles integrated into the HiLusterPLUS Dia PolisherKGR020 (Pack 6) Kerr code: 2653
£20.58
-
Edenta Refills Cup Amalgam Polisher – Green
Cup Amalgam Polisher – Green 0135RA 060KUD128 (Pack 12) Edenta code: 0135RA-12
£18.22
-
Shofu Dura-Green Stones Round RD2 FG (Ref, 0108)
Silicon carbide stones with a ceramic binder Dura-Green are made of high-quality silicon carbide and are exceptional for fast and splinter proof contouring and finishing of porcelain, composite, precious alloys, and amalgam. In the dental laboratory the extensive range of shapes helps to optimally produce the individual characteristics of the surface texture of front teeth with their vertical and horizontal structures. In the dental practice Dura-Green stones are used for quick and simple contouring and finishing of restorations made of all modern filling materials. Dura-Green stones can be cleaned or customised to any individual shape with the Abrasives Dresser. Benefits Precise concentricity Low vibration performance Consistent cutting action Binder matched exactly to the grinding particles Long-lasting operating life Optimal cutting performance Indications Chairside Contouring and finishing of porcelain, composites, precious metal and amalgam In the dental laboratory Contouring and finishing porcelain, indirect composites and metals Suitable for the following materials: Porcelain, composite, precious alloys and amalgamKSR108 (Pack 12) Shofu code: 0108
£17.13
-
Shofu Porcelain Laminate Kit RA No 0317
Systematic polishing of porcelain and enamel in three steps. With the polishers Ceramisté Standard, Ceramisté Ultra and Ceramisté Ultra II this kit offers the proper instruments for each working step from prepolishing to high-gloss polishing. The assortment of Ceramisté polishers with midipoint and cup shapes is ideal for harmonising the marginal seals between porcelain and tooth enamel. The kit is also suitable for polishing porcelain veneers. Contents:- Ceramisté Standard: 4 each cup, midipoint Ceramisté Ultra: 2 each cup, midipoint Ceramisté Ultra II: 1 each cup, midipointKSR317 (Box 12) Shofu code: 0317
£23.93
-
UnoDent Acrylic Polisher Grey Silicone Polisher - Medium grit
Polishing for smooth surfaces. Grey - Medium grit Silicone polisher for smoothing and condensing material surfaces. Produces a slight lustre. Suitable for preparing for high-lustre polishing. Grey Silicone Polisher 0667HP 070 Grey Silicone Polisher 0667HP 070KUD100 (Pack 6) UnoDent code: KUD100
£16.95
-
Shofu CompoSite Points Polishing Bullet CA (Ref. 0191)
For composite CompoSite instruments are designed for a perfect finish of composite restorations without scratching the surrounding enamel. CompoSite polishers are used for finishing and prepolishing, CompoSite Fine (with white banded shank) for polishing. The flexible and adaptable cups and disks will polish subgingival and interproximal surfaces safely while pear points and midipoints are recommended for the polish of occlusal and lingual surfaces. Indications:- Chairside: For finishing and polishing of micro and hybrid composite restorations such as inlays, onlays, crowns and bridges in the patient’s mouth as well as for removing orthodontic adhesives Benefits:- Silicone polishers with integrated abrasive grains Matches hardness of silicone Optimal ratio between speed and contact pressure Gentle treatment of the tooth enamel No polishing paste is needed Long-lasting operating lifeKSR295 (Pack 12) Shofu code: 0191
£18.30
-
3M Sof-Lex Finishing and Polishing Strips Fine/Super Fine
For finishing and polishing interproximal areas, Thin, flexible backing with aluminium oxide coating Centre-gapped strip with two abrasive grades per strip, which allows interproximal access Three different types (fine/superfine, coarse/medium, coarse/medium [narrow]) 7 x 5/32†(Ref. 1956) (17.5cm x 3.9mm)KTS015 (Pack 120) 3M code: 1956
£31.05
You have seen 288 out of 387 products